products

Home > products > Dishwasher Tub Production Line > Automation Dishwasher Tub Assembly Line with Customization Availability

Catagories

Home Appliance Sheet Metal Stamping Die

(22)

Dishwasher Tub Production Line

(29)

Washing Machine Drum Production Line

(33)

Front Loading Washing Machine Drum Production Line

(7)

Top Loading Washing Machine Drum Production Line

(11)

AGV Driving Wheel

(1)

Contacts

Contacts: Ms. Luo

Tel: 86--18012378214

Contact Now

Mail Us

Automation Dishwasher Tub Assembly Line with Customization Availability

Name: Automation Dishwasher Tub Assembly Line with Customization Availability
Brand: Automation Dishwasher Tub Assembly Line with Customization Availability
SKU: Automation Dishwasher Tub Assembly Line with Customization Availability
Rating: 4.8 (107 reviews)

Product Details

Place of Origin: China

Certification: ISO

Payment & Shipping Terms

Minimum Order Quantity: 1 set

Delivery Time: Peak Season Lead Time: 3-6 months, Off Season Lead Time: 1-3 months

Payment Terms: LC, T/T

Get Best Price

Product Details

Product Description

Highlight:

Model NO.:	DW-17	Automatic Production Line:	Assembly
Flexible Production:	Intelligent Manufacturing	Rhythm:	Flow Production Line
Production Scope:	Parts Production Line	Transport Package:	Wooden Cases, Vacuum Packing, Anti-Rust Oil
Trademark:	IDO	Origin:	China
Customization:	Available	Automation:	Automation
Warranty:	12 Months

Model NO.:	DW-17
Automatic Production Line:	Assembly
Flexible Production:	Intelligent Manufacturing
Rhythm:	Flow Production Line
Production Scope:	Parts Production Line
Transport Package:	Wooden Cases, Vacuum Packing, Anti-Rust Oil
Trademark:	IDO
Origin:	China
Customization:	Available
Automation:	Automation
Warranty:	12 Months

Automation Dishwasher Tub Assembly Line with Customization Availability

Dishwasher Tub Assembly Line by Wuxi IDO Technology

Factory Direct Supply Automatic Dishwasher Tub Assembly Line

No.	Machine Name	Q'ty
ST1.1	Clinch of bracket spray arm on side-back-side flat	1 set
ST1.2	Clinch of bracket spray arm on upper cover	1 set
ST2.1	Side-back-side flat isolation oven line (with cooling tower)	1 set
ST2.2	Bottom and upper cover isolation oven line (with cooling tower)	1 set
ST3	U-bending of side-back-side flat	1 set
ST4	Hot melt dispensing on upper cover and bottom	1 set
ST5	Mechanical roll seaming: bottom/upper part with side-back-side	1 set
ST6	Flanging	2 set
ST7.1	Decoiling (sealing support)	1 set

ST7.2	Forming (sealing support)	1 set
ST7.3	Cutting (sealing support)	1 set
ST7.4	Bending (sealing support)	1 set
ST7.5	Notch cutting (sealing support)	1 set
ST7.6	Clinching sealing support with Tub	1 set
ST8.1	Clinching hinge plate with sealing support	1 set
ST8.2	Loading of frame reinforcement	1 set
ST8.3	Clinching frame reinforcement with Tub	1 set
ST8.4	Corner clinching	1 set
ST9	Roll transporter	1 set

ST1: Clinching

1. Clinching operation is driven by servo electric cylinder.

2. Choose TOX clinching tools.

3. 4mm cliching tools are recommended. The specific model shall be determined according to material test report provided by TOX.

4. Clinching matrix shall be applied with oil.

5. Guide rails and sliders are all designed with auto lubrication system.

Factory Direct Supply Automatic Dishwasher Tub Assembly Line

ST3: U-bending of side-back-side flat

1.Use the conveyor belt to send the side-back-side flat into the bending equipment.

2.The bending mechanism is driven by the electric cylinder to move downward to complete the bending.

3.Use the robot to grip the product and enter the next pre-assemble station.

4.In order to be compatible with 710mm and 630mm models, the corresponding parts of the intermediate positioning mechanism needs to be manually replaced.

ST4: Hot melt dispensing & pre-assembling

1.Use transfer to load the Top & Bottom to the loading position;

2.The conveyor line moves horizontally to the right for hot melt dispensing work;

3.Use professional one-component hot melt supply system to realize curve dispensing by robot.

4.Finally, the qualified products will be at the unloading/pre-assembling position, to be taken by a robot.

ST5: Roll seaming

1.Use full servo to drive the rolls.

2.The internal support die is designed according to the actual product.

3.Configure the robot hand to realize automatic loading and unloading.

4.Stand-alone machine cycle time ≤ 15s.

5.In order to be compatible with 710mm and 630mm models, the corresponding parts of the intermediate positioning mechanism needs to be manually replaced.

1.Casted machine frame, which can ensure the overall stability of the equipment and no deformation after long-term use.

2.The Top and Bottom are positioned inside the machine, so there is no need to adjust the pre-assembly tooling.

3.A positioning mechanism for Wrapper is designed to ensure the stability during the seaming process, and ensure that the seaming joint of Top & Wrapper and Bottom & Wrapper are aligned, and the left and right misalignment does not exceed 1mm.

4.Use the track mold to control the action of rolls, with stable seaming effect, and the pass rate can be 99.5%.

5.Using 10 rolls for seaming, with higher efficiency and shorter cycle time.

6.Movable and sliding central block, not easy to get scratches on the product surface during loading and unloading.

7.The width of the central block can be adjusted by servo, which contributes to producing variants.

ST6: Flanging

1.The hydraulic system drives the middle support module to expand outward.

2.The outer positioning mechanism is hydraulically driven to move inward.

3.Self-lubricating materials are used for the parts of the guide mechanism.

4.Cycle time of flanging machine: ≤10s.

5.To produce 710mm and 630mm models, two flanging machines are required.

ST7: Sealing support forming line

1.The incoming material of the sealing frame is in a coil state, so a decoiler will be prepared.

2.The forming machine completes the forming of the sealed frame shape.

3.Because the cutting machine needs to be compatible with 710mm and 630mm models, the bottom needs to be driven by a servo motor.

4.For the bending action, because of the difference between the two models, the positioning mechanism also needs to be adjusted by a servo motor.

5.The cutting mechanism needs to be driven pneumatically.

ST7: Sealing support clinching

1.Clinching operation is driven by servo electric cylinder to realize common production of 710mm and 630mm models.

2.Choose TOX clinching tools.

3.5mm cliching tools are recommended. The specific model shall be determined according to material test report provided by TOX.

4.Clinching matrix shall be applied with oil.

5.Guide rails and sliders are all designed with auto lubrication system.

ST8: Frame reinforcement clinching

ST8.1: Clinching hinge plate (left/right) with tub is achieved through 2 electric servo cylinders with 6mm TOX clinching tools.

ST8.2: Manually put 3 parts into the conveyor line in the specified direction, to be grabbed by robot into clinching machine.

ST8.3: One Tub is grabbed by robot and put in the clinching position, 3 reinforcements are grabbed by robot and put in the clinching machine, to finish the clinching of frame reinforcements with Tub.

ST8.4: Corner clinching of frame reinforcements, with loading and unloading by robots.

ST8: Frame reinforcement clinching

1.Clinching operation is driven by servo motor to realize common production of 710mm and 630mm models.

2.Choose TOX clinching tools.

3.6mm cliching tools are recommended. The specific model shall be determined according to material test report provided by TOX.

4.Clinching matrix shall be applied with oil.

5.Guide rails and sliders are all designed with auto lubrication system.

No.	Name	Brand
1	Servo motor	Mitsubishi or Siemens
2	Gear motor	SEW or Siemens
3	3-phase asynchronous motor	Siemens
4	Touch screen	Mitsubishi or Siemens
5	PLC	Mitsubishi or Siemens
6	Pneumatic component	SMC or FESTO
7	Hydraulic component	REXROTH
8	Adhesive dispensing component	Graco or Nordson
9	Inductive switch	Omron or SICK or Keyence
10	Guide rail and sliders	HIWIN or THK
11	Bearings	NSK
12	Optical grating	SICK
13	Robot	ABB or KUKA

Tags:

Home Appliance Sheet Metal Stamping Die

Dishwasher Tub Production Line

Washing Machine Drum Production Line

Front Loading Washing Machine Drum Production Line

Top Loading Washing Machine Drum Production Line

Clothes Dryer Production Line

Complete Washing Machine

Glass Processing Machinery

AGV Driving Wheel

Automation Dishwasher Tub Assembly Line with Customization Availability

Flexible Transmission Type Appliance Dishwasher Tub Production Line

Dishwasher Tub Manufacturing Assembly Line for 2 Models Rhythm Flow Production Line

Parts Production Line for Kitchen Dishwasher Inner Drum Assembly Line Automation

Flexible Production Supply Dishwasher Assembly Roll Seaming Machine

Customized Flow Production Line for Household Dish Washing Machine Inner Tub Assembly

Customized Home Dishwasher Tub Manufacturing Machinery with Flexible Transmission

Home Dishwasher Inner Tub Assembly Automatic Production Line

Intelligent Manufacturing Rhythm for Flexible Household Dishwash Machine Tub Assembly Line

Engineers to Service Machinery Overseas Household Dish Washer Tub Manufacturing Machinery

DW-20 Flexible Production Automatic Customized Dish Washing Equipment Tub Assembly Line

Customized Dishwasher Tub Rhythm Flow Production Flexible Line DW-19

Home Appliance Sheet Metal Stamping Die

Dishwasher Tub Production Line

Washing Machine Drum Production Line

Front Loading Washing Machine Drum Production Line

Top Loading Washing Machine Drum Production Line

Clothes Dryer Production Line

Complete Washing Machine